ClayTech's BlueDiver C30 C30A C40 C40A pumps are multi-purpose water transfer pumps with a float and are designed for aerated waste-water treatment systems with high head applications and are particularly suited for applications using sub-surface irrigation.
The ClayTech BlueDiver C30 C30A C40 C40A submersible and drainage pumps have been designed for aerated waste-water treatment systems with high head applications and are particularly suited for applications using sub-surface irrigation.
These pumps have been designed to ClayTech specifications with high head and relatively low flow, allowing the pumping system to operate at the 'best efficiency point' of the pump.
They are multi-purpose water transfer pumps with a float to control the starting and stopping of the pump by the water level, for tank emptying.
Dimensions: 150mm x 150mm x 400mm (without controller)
The BlueDiver C30A is the C30 teamed with the Aquatron Pressure Controller.
The BlueDiver C40A is the C40 teamed with the Aquatron Pressure Controller.
The Aquatron Pressure controller turns the C30 and the C40 into an automatic pressure system thus making them suitable for use with normal household tap operation.
It allows automatic pump operation: It starts the pump when the tap is turned on and stops it about 10 seconds after the tap is turned off.
It protects the pump from dry operation: It stops the pump when there is no flow of water, thus preventing possible damage to the pump. This alarm is indicated by the LED called FAILURE on the front of the device.
It ensures constant flow and pressure.
Features:
The BlueDiver C30 and C40 submersible and drainage pumps can be used for the following applications:
| Product Code | CLA BLUEDIVER C30, CLA BLUEDIVER C30A, CLA BLUEDIVER C40, CLA BLUEDIVER C40A |
|---|---|
| Brand | ClayTech |
| Code | CLA BLUEDIVER C30 - 807692, CLA BLUEDIVER C30A -807748, CLA BLUEDIVER C40 -807693, CLA BLUEDIVER C40A - 807749 |
