Contains 4m of pipe, 1 x cowl, 1 x 900mm solid gal flue, 1 x clamp - Overall size 100mm.

Abey's twin wall flexible gas flue system helps you finish those difficult jobs fast.

Abey Gas Flex is available in easy to use 1.5m lengths (75 to 300mm diameter sizes). Simple to use connectors help you make the length you need. Just push Gas Flex into joiner and fix with galvanised screws. Connect Gas Flex to appliance with hose clamp.

Abey Gas Flex can be easily bent around roof obstructions. Ensure adequate fire protection clearance from combustible materials (25mm).

Above roofline - Feed Abey Gas Flex through to top of rigid flue and fix into place with screws/rivets (3 sides).

Fix and flash Abey's galvanised pipe to the roof (as per sec 5.13.6 AS5601-2004 for flue terminal permissible locations).

Inspect flue, cowl and pipes for clearances and any obvious damage before testing appliance

Disclaimer: Gas flues should only be installed by authorised persons and in accordance with manufacturers instructions, local gas fitting regulations, municipal building codes, AS 5601-2004, gas installations and any other statutory regulations. The rigid flue pipe mentioned is classified as a single wall metal flue and clearances to combustible materials must be in accordance with table 5.6 in AS5601-2004.